Inch series · OEM wire insert supply · Made to drawing

UNC & UNF Wire Thread Inserts for OEM and Distributor Orders

Taiyi manufactures UNC and UNF wire thread inserts for industrial thread reinforcement, production assemblies, thread repair and distributor programs. Specify the finished screw-thread designation, threads per inch (TPI), 1D–3D installed-length class, free-running or screw-locking function, tanged or tangless drive, wire grade and purchase quantity. Customer drawings and samples support custom engineering review before quotation.

UNC + UNFExact coarse or fine TPI
1D–3D lengthsNominal installed-length classes
OEM supplyDrawing, sample and batch review
Stainless steel wire thread inserts product photo for distributor and OEM supply
Taiyi representative stainless steel wire thread inserts for industrial OEM and distributor order specifications.

Thread-series specification

UNC vs UNF: Match the Finished Screw Thread

UNC means Unified National Coarse; UNF means Unified National Fine. A 1/4-20 UNC mating screw has 20 threads per inch. A 1/4-28 UNF mating screw has 28 threads per inch. Both have the same nominal quarter-inch fastener diameter, but the thread pitch and matching insert design are different.

1/4-20 UNC20 TPI coarse finished screw thread.
1/4-28 UNF28 TPI fine finished screw thread.
Prepared STI threadDedicated insert receiving thread, not a normal screw tap.

OEM threaded assembly

Confirm the fastener, parent material, required thread engagement, existing wall thickness, operating load and installation access before selecting insert length.

Repair and replacement

Identify the original damaged screw thread, available parent material and compatible tooling before reworking the receiving hole.

Important: nominal finished fastener diameter, STI receiving hole size and uninstalled coil diameter are different measurements. The length references below are not STI drill sizes; see the inch-series STI preparation chart and confirm the selected insert specification.

Coarse-pitch inch sizes

Common UNC Wire Thread Inserts and Nominal Lengths

The values below show finished internal screw-thread designations with nominal installed 1D, 1.5D and 2D length classes. They are illustrative engineering dimensions in inches, not free-coil dimensions, stock promises or drill-size recommendations. Exact limits come from the drawing or selected insert standard.

Common UNC dimensions for specification planning.
Finished inch threadTPI1D (in)1.5D (in)2D (in)RFQ check
#6-32 UNC320.1380.2070.276Confirm tang drive
#8-32 UNC320.1640.2460.328Match STI tap and driver
#10-24 UNC240.1900.2850.380Not #10-32 UNF
1/4-20 UNC200.2500.3750.500Specify receiving hole depth
5/16-18 UNC180.3120.4690.625Confirm parent material
3/8-16 UNC160.3750.5620.750Check installed engagement

For more sizes and 2.5D–3D length examples, use the full Metric, UNC and UNF insert size chart. A length class alone does not determine load capacity or the required receiving tap.

Fine-pitch inch sizes

Common UNF Wire Thread Inserts and Nominal Lengths

Always include the series and TPI. For example, #10-24 UNC and #10-32 UNF are different threads despite having the same nominal fastener diameter. A request for only “#10 insert” is incomplete.

Common UNF dimensions for specification planning.
Finished inch threadTPI1D (in)1.5D (in)2D (in)RFQ check
#6-40 UNF400.1380.2070.276Not #6-32 UNC
#8-36 UNF360.1640.2460.328Fine STI tap
#10-32 UNF320.1900.2850.380Not #10-24 UNC
1/4-28 UNF280.2500.3750.500Verify fastener pitch
5/16-24 UNF240.3120.4690.625Check installation tool
3/8-24 UNF240.3750.5620.750Confirm approval drawing
Length selection: 1D, 1.5D and 2D are nominal installed-length classes related to fastener diameter. Functional engagement depends on parent material, hole depth, bolt engagement and loading. No universal pull-out strength claim follows from these dimensions.

If your drawing specifies metric pitch, select the separate metric wire insert range; do not assume metric and inch threads interchange.

Screw function and drive design

Free-Running, Screw-Locking, Tanged and Tangless Options

The screw engagement function is independent of the installation interface. Free-running inserts provide an ordinary specified screw thread. Screw-locking inserts require defined fastener-retention characteristics. Tanged and tangless refer to installation drive designs; they do not by themselves define the locking function.

Specify both screw function and installation interface.
ConfigurationApplication intentEngineering approval
Free-running / tangedConventional threaded engagement, tang-driven installation.Matched driver and tang disposal step.
Free-running / tanglessConventional engagement with tangless tooling.Matched tangless insertion system.
Screw-locking / tangedDefined retention with tang-driven installation.Fastener and prevailing-torque acceptance.
Screw-locking / tanglessRetention and tangless drive when feasible.Sample qualification and installation tooling.

Functional tests for locking inserts

Provide the mating fastener, expected prevailing-torque window, test cycles and reporting requirement. A generic locking description is not evidence that every specific design meets a customer test specification.

Review screw-locking wire inserts

STI preparation and tooling

Use the approved tap, gage, drill, driver and insertion method. Confirm blind vs through holes, installed depth and tang removal where required.

Installation tools and accessories

Tanged vs tangless wire thread inserts comparison chart showing installation differences and application advantages
Installed-drive comparison: confirm the design, tool and removal procedure before purchase.

Actual factory capability

Inch Inserts Made to Customer Drawing

According to Taiyi’s own manufacturing capability page, the factory operates 15 automatic wire thread insert coiling machines with mandrel-based forming and engineering inspection practices. The tooling, wire profile, length, material, installation interface and any locking requirement are evaluated against the drawing or approved standard before manufacturing commitment.

01 / SPECIFY

Drawing review

Finished UNC/UNF thread, TPI, drive style, length, grade and application.

02 / SET UP

Forming tooling

Review matched mandrels, wire section, possible finishes and processing.

03 / VERIFY

Samples and inspection

Check agreed geometry, installed thread fit and functional tests if specified.

04 / RELEASE

Production batches

Confirm lot quantity, packaging, marking and required quality records.

Scope of supply: catalogue example sizes do not guarantee immediate inventory, qualification to every standard, specific loading results, material availability or lead time. All special configurations require actual order-level feasibility and evidence.

For material choices, see stainless steel wire thread insert supply; for industrial quantities, see OEM and distributor orders.

Automatic production station forming stainless steel wire thread inserts at Taiyi factory
Real Taiyi automatic insert-forming station. Actual tooling is matched to approved thread designation and drawing.

Information needed for quotation

UNC / UNF Wire Insert RFQ Checklist

Send the full thread series and TPI on each line item. For custom designs, use a controlled drawing or approved sample to define geometry, performance and inspection. Where installation matters, include parent part details and the selected STI tap system.

RFQ requirements for inch-series OEM wire inserts.
SpecificationWhat to providePurpose
Finished screw threadUNC or UNF designation and exact TPI.Prevents fastener/insert pitch mismatch.
Installed length1D, 1.5D, 2D or drawing-defined.Sets nominal engagement class.
Screw functionFree-running or locking; torque if applicable.Defines screw engagement performance.
Drive styleTanged or tangless and intended driver.Controls tooling and tang handling.
Parent componentMaterial, wall thickness, depth, blind/through hole.Checks receiving thread feasibility.
Wire and finishAgreed material grade and surface treatment.Supports compatibility and production sourcing.
InspectionDrawing revision, sample, gauges, report requirements.Defines acceptance and traceability.
Order quantityPer-item volume, releases, labeling and packing.Enables batch quotation and supply planning.
Illustrative RFQ: “1/4-20 UNC, 1.5D (0.375 in nominal installed length), free-running, tanged, specified 304 stainless wire, controlled drawing revision B, 5,000 pieces per release, approved first-article sample, industrial bulk pack.” This is a quotation example, not a live stock or certification claim.

Related buyer references: inch STI drill/tap chart and thread repair kits.

Cross-sectional diagram showing a helical wire thread insert installed below the part surface
Conceptual installed insert profile and depth; all STI dimensions follow the approved insert system.

Engineering and procurement questions

UNC and UNF Wire Thread Insert FAQs

Can 1/4-20 UNC inserts be substituted for 1/4-28 UNF?

No. The screw pitches differ. A complete thread designation controls the insert, mating screw and matched STI preparation.

Does 1.5D mean the uninstalled coil is 1.5 times the screw diameter?

No. The D value is a nominal installed-length class. Relaxed coil geometry and tolerances are controlled by the selected product specification.

Can I use the nominal screw diameter as the STI drill size?

No. The receiving STI hole and tap have their own dimensions. Follow the insert system’s preparation requirements and corresponding gauge instructions.

Are screw-locking torque values identical for all inch insert designs?

No. Specify the mating fastener, test method, required torque window and acceptance documentation for the requested product.

Can Taiyi review custom inch-series wire inserts?

Yes, drawing-based manufacturing inquiries can be reviewed for tooling, wire material, dimensions, processes, sample approval and production quantity before a commercial commitment.

Request a UNC / UNF OEM Manufacturing Quote

Send full inch thread and TPI, nominal insert length, drive style, screw-locking function if needed, wire grade, drawing revision, lot quantity and any inspection requirements. Taiyi will review the specific manufacturing request before quotation.

UNC / UNF Engineering Standards and Drawing Requirements

Start with the complete finished screw thread and TPI, then define the nominal installed length, free-running or locking function, tanged or tangless drive, material grade, controlled drawing revision, and acceptance requirements. Industry standard references and product-family part numbers address different parts of an order: neither a standard name nor a catalog description proves that an individual Taiyi insert has been qualified or certified. The customer-approved drawing and agreed documentation control actual production.

Relevant reference families and their procurement roles: AS7245B covers corrosion-resistant formed-wire insert procurement and, in its published scope, UNS S30200 or UNS S30400; confirm the customer-requested edition, material, dimensions and evidence, rather than assuming it covers 316 stainless. NASM8846 concerns helical-coil screw-thread insert requirements; specify edition, configuration, inspection and any exceptions. NASM122076 and NASM124651 are relevant free-running UNC and UNF part-designation series; send the full applicable part number, pitch, installed length and drawing. NASM21209 is a relevant screw-locking designation; agree the mating fastener, prevailing-torque criteria, test cycles and sampling. For a custom drawing or approved sample, define wire cross section, drive interface, material, finish, tolerances and revision control before bulk manufacture. The dedicated size-chart page provides the longer 1D–3D dimensional matrix.

Inch Wire Insert Materials, Passivation and Special Finishes

Wire grade, surface condition, and locking function are separate engineering and purchasing decisions. For 304 stainless (UNS S30400), specify wire condition, geometry, applicable procurement requirements and material evidence. For 316 stainless, check whether the service environment requires that separately specified grade and have the factory assess sourcing, tooling and its own acceptance basis; 304 requirements cannot be assumed interchangeable. For a special alloy, supply its complete designation and the operating temperature, chemical exposure or wear requirements so forming feasibility and functional tests can be evaluated. A size shown on this page is not a stock guarantee.

For cleaning, pickling or passivation, provide the required compatible surface condition, process and inspection criteria. Taiyi documents in-house capabilities for these applicable operations. Identification coloring requires an agreed marking method and release conditions. Special coating, plating or lubrication should be assessed for possible outside processing, coating thickness, adhesion and effects on fastener fit, corrosion and assembly friction. Coating and material changes may affect prevailing torque and require renewed sample approval. Exact processing, external arrangements, documentation and commercial feasibility are confirmed for the order rather than promised for every inch-series configuration.

Inspection, Sample Qualification and Repeat-Order Release

An actionable UNC/UNF order specifies not only what is inspected, but how and at what sampling frequency. Thread designation and TPI must be checked against the mating screw, approved drawing and thread gage. The coil's wire profile, relaxed/free diameter and installed length class need drawing tolerances and a suitable measurement method; none of these are interchangeable with STI tap-drill dimensions. Tanged drive, break-off notch and tangless driving features require the correct installation tool plus specified visual or dimensional checks. A trial installation must use the customer's agreed parent material, prepared STI receiving thread, hole condition and screw engagement.

For screw-locking inserts, define the mating fastener, intended prevailing-torque range, test method, cycles and sample count before a locking result can be claimed. For production release, agree material or lot identity, inspection evidence, labeling, packing and document list. Taiyi's published factory information describes thread and free-diameter gaging, caliper or video measurement, visual review and installation testing according to an agreed plan; this does not imply every individual insert is installation-tested. A defensible repeat-order path is drawing review → forming/tooling feasibility → sample → dimensional and functional approval → controlled batch release. Changing wire, finish, tooling or acceptance criteria may require updated sample approval.

For a factory quotation, send the controlled drawing or specified standard edition, complete UNC/UNF callout, nominal D-length, drive and locking type, material and finish, host-part conditions, quantity, required tests and documentation. Use the Request Quote button above to submit the requirements. Taiyi will confirm the applicable manufacturing and inspection scope for the actual order.